Tag Archive for: duplex house examples

A well-planned duplex can turn one ageing dwelling into two high-quality homes, but the outcome depends on much more than fitting an extra front door onto the site. This duplex construction example follows a typical Sydney scenario: replacing a dated freestanding house with two attached family homes that meet planning requirements, suit the streetscape and can be built with clear control over quality, cost and timing.

The example is illustrative rather than a fixed design or price. Every site has its own planning controls, services, ground conditions and owner objectives. The value of working through a realistic example is understanding the decisions that need to be made before construction begins.

The duplex construction example: from one home to two

Consider a level 620-square-metre block in an established Sydney suburb. The existing three-bedroom brick home is tired, difficult to extend efficiently and no longer suits the owner’s plans. The owner wants to replace it with two attached, two-storey dwellings: each with four bedrooms, two bathrooms, a ground-floor powder room, single garage, open-plan living area and private rear courtyard.

At first glance, the brief sounds straightforward. The block has a reasonable frontage, access to the street and established services. However, the project still needs to respond to setbacks, building height, floor space, landscaped area, parking, stormwater, privacy, overshadowing and local character requirements. These controls can shape the design as much as the owner’s preferred façade or internal layout.

The most efficient duplex designs do not simply divide the site down the middle. They make deliberate use of the block’s orientation, driveway position and usable outdoor space. In this example, the garages sit towards the front to provide practical off-street parking, while living areas open to north-facing rear courtyards. Upper-level windows are positioned and screened to protect neighbouring privacy without making the rooms feel enclosed.

Start with site feasibility, not floor plans

Before engaging in detailed design, a builder and design team should test whether a duplex is feasible on the land. This early work reduces the risk of spending money on plans that cannot be approved or delivered within budget.

A proper feasibility review considers the title and any easements, the zoning and applicable planning controls, heritage considerations, flood or bushfire constraints, sewer and stormwater locations, site slope, access for construction and the condition of neighbouring properties. A survey is usually essential, while geotechnical information may be needed to understand soil conditions and likely footing requirements.

For the example property, the survey identifies a sewer line running near one side boundary and a slight fall towards the rear. Neither issue prevents the duplex, but both influence the layout. The building footprint is adjusted to maintain required clearances, and the stormwater design is developed early rather than left until construction. This is a practical example of why site investigations are not an administrative exercise. They directly affect buildability and cost.

It also pays to assess demolition access at this stage. A narrow street, overhead power lines, significant trees or restricted vehicle access can affect how materials, excavation equipment and concrete deliveries are managed. These matters need a construction response, not just a design response.

Approvals shape the project programme

A duplex development in NSW may proceed through a development application pathway or, where the proposal meets the relevant criteria, a complying development pathway. The appropriate route depends on the site, the design and local planning controls. Assuming that a project qualifies before the checks are complete can create avoidable delays.

For this example, the design requires a development application because of the site-specific planning considerations. The approval package includes architectural plans, a survey, planning documentation, stormwater details and supporting reports as required. Depending on the property, this may also involve arborist, bushfire, flood, traffic, acoustic or heritage input.

Once approval is obtained, the project moves into construction documentation and pre-construction planning. This is where specifications, engineering, selections, service connections, certification requirements and construction sequencing are properly coordinated. A transparent quote should reflect this level of definition. A low initial figure that excludes major site works, finishes or approvals is not a useful basis for a significant construction decision.

Designing two homes that feel complete

The central challenge in duplex design is giving each dwelling the privacy, storage and natural light expected of a standalone family home. A poor design can produce narrow, dark rooms and compromised outdoor areas. A well-resolved design makes efficient use of every square metre without feeling overbuilt.

In this case, each home has its own clearly defined entry, garage access and rear courtyard. The shared wall is treated as an acoustic and fire-rated building element, with construction details selected to meet the relevant requirements. Bedrooms are separated from busy living zones where possible, bathrooms are stacked to simplify plumbing runs, and dedicated storage is included near the entry, laundry and bedrooms.

Material selection also deserves early attention. Face brick, lightweight cladding, rendered finishes, metal roofing and window systems should be chosen for appearance, maintenance, thermal performance and budget, not simply from a display-board sample. The two homes can have complementary façades while retaining an appropriate level of individuality. In established suburbs, this balance often helps the new build sit more comfortably within the street.

The thermal performance strategy should be considered alongside the architectural design. Orientation, glazing size, shading, insulation, ventilation and the location of living spaces affect everyday comfort and running costs. Large windows may look appealing, but on the wrong elevation they can increase heat gain and reduce privacy. The best solution depends on the site rather than a one-size-fits-all plan.

What construction looks like on site

After approvals, documentation and contracts are finalised, the physical build generally begins with site establishment and demolition. The site is secured, services are managed or disconnected as required, and the existing structure is removed. Any unexpected issues, such as buried rubble, unsuitable soil or unrecorded services, should be identified promptly and managed through a documented process.

The next stages are excavation, footings, slabs and drainage. For two attached dwellings, accuracy at this point is critical because small set-out errors can affect walls, garages, drainage falls and boundary clearances later in the build. Concrete work, reinforcement and waterproofing details need careful supervision before they are covered.

Framing then establishes the scale of the duplex. The roof structure, external cladding or brickwork, windows and external doors follow, bringing the building to a weatherproof stage. Internal trades can then progress in sequence: plumbing and electrical rough-in, insulation, plasterboard, waterproofing, tiling, joinery, painting, flooring and fit-off of fixtures and appliances.

A fully managed construction approach matters because these trades are interdependent. Tilers cannot proceed correctly without compliant waterproofing. Cabinetry relies on accurate wall and service positions. Electrical and plumbing fit-off must coordinate with the final kitchen, bathroom and lighting selections. Clear scheduling and regular quality checks help avoid the rework that often occurs when trades are managed in isolation.

External works should be allowed for from the beginning, not treated as an afterthought. In this example, the scope includes driveways, paths, fencing, landscaping, drainage completion, letterboxes and separate service metering. These details are essential to making both homes ready for occupation and presenting a finished result at handover.

Managing costs without compromising the build

Duplex construction costs vary considerably across Sydney and NSW. The main drivers include demolition complexity, slope, soil classification, retaining, design size, structural requirements, façade materials, level of internal finishes, service upgrades and approval conditions. Market availability of labour and materials can also affect programme and pricing.

The practical way to control costs is to make major decisions early and document them clearly. Changes after framing, waterproofing or joinery production are more expensive than decisions made during design. Owners should allow a realistic contingency for unknown site conditions, particularly on older blocks, while avoiding vague allowances for items that can be selected before the contract is signed.

A transparent builder will explain what is included, what is excluded and where provisional allowances may apply. That clarity is more valuable than an attractive headline price. For a project of this scale, homeowners need to compare scope, specifications, programme, supervision and compliance commitments, not just the bottom line.

Handover is not simply the last day on site

Before completion, the duplex should be inspected against the approved documents, contract scope and relevant construction standards. Defects are addressed, compliance documentation is collated, services are tested and the homes are cleaned and prepared for handover. The owner should receive clear information about warranties, care requirements and any practical operation of installed systems.

For homeowners building a duplex to retain, sell or house extended family, the strongest result comes from treating design, approvals and construction as one connected process. Start with what the site can genuinely support, invest in detailed planning, and choose a construction partner with the systems to carry the project through to a properly finished home.